Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

John Deere Tractors Discussion Forum
:

Eric--- John Deere G piston

Welcome Guest, Log in or Register
Author 
Old Joe

01-04-2004 10:01:41




Report to Moderator

Hello Did you find those Model G pistons? If so would you send me these dimenions of it, and are they iron or alum.
1) Overall from top of piston to bottom of piston
2) Size of wrist pin hole
3) From center of wrist pin hole to top of piston
4) From top of piston to top of top ring
5) >From top of piston to bottom of bottom ring 6) If anyone could post a close up photo of a G pistons it would be very helpful

[Log in to Reply]   [No Email]
Eric

01-05-2004 15:58:24




Report to Moderator
 Re: Eric--- John Deere G piston in reply to Old Joe, 01-04-2004 10:01:41  
Center of wrist pin to top 5 in. Center of pin to bottom 3.25 in. Top ring .5 from top. Bottom ring 1 9/16 from center of pin. Stock factory pistons were all cast iron.



[Log in to Reply]  [No Email]
Eric

01-04-2004 17:29:26




Report to Moderator
 Re: Eric--- John Deere G piston in reply to Old Joe, 01-04-2004 10:01:41  
Sorry about that been busy and havent thought about the pistons will do it sometime tomorrow its to cold to do anything else anyway. Will reply monday Eric



[Log in to Reply]  [No Email]
John D

01-04-2004 11:00:40




Report to Moderator
 Re: Eric--- John Deere G piston in reply to Old Joe, 01-04-2004 10:01:41  
Old Joe, email me at [email protected] I have a set of std all fuel G I would be happy to email you with a picture and measurments. John



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy