Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Case Stationary Baler - Need help - Pictures

Welcome Guest, Log in or Register
Author 
Dave62

10-09-2005 11:13:46




Report to Moderator

Hello, we have a Case stationary baler, 17" X 22" , a link to it is :www.lakecountyshow.org/baling/baling.htm

We are trying to rebuild the front frame assy. where it fastens to the axle. The way it is now is an old cobbled job from years ago that really does not allow the axle to turn at all without falling off of a support piece that someone welded on.
Seems as though there needs to be a round piece like a 5th wheel welded to the frame for the axle to swivel on easily to make left & right turns.

Any pictures or info would be greatly appreciated!
Thanks, Dave

[Log in to Reply]   [No Email]
Dave62

10-09-2005 11:17:03




Report to Moderator
 Link in reply to Dave62, 10-09-2005 11:13:46  
A link to the URL www.lakecountyshow.org/baling/baling.htm

Should pop up this time



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy