Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

What is bigger than a New Holland 77 baler?

Welcome Guest, Log in or Register
Author 
Don Livingston

05-10-2005 17:15:45




Report to Moderator

What New Holland baler was bigger than a 77 or Super 77? What are the details of these bad boys? I am sure they are hard to find. I have a 77 with a motor and a Super 77 pto. I believe these were rated at 10 ton an hour. Both are in great shape.
Don L.
ph 507 433 0073




[Log in to Reply]   [No Email]
sammy the RED

05-11-2005 17:04:36




Report to Moderator
 Re: What is bigger than a New Holland 77 baler? in reply to Don Livingston, 05-10-2005 17:15:45  
Don, During the 77 seris era, which I belive ran from 1949 to 1958, other models that were made at the same time were:

Super Hayliner 78
Model 80
Model 87
Model 98
Model 68
Model 66



[Log in to Reply]  [No Email]
Steve from New Holland

05-11-2005 04:30:56




Report to Moderator
 Re: What is bigger than a New Holland 77 baler? in reply to Don Livingston, 05-10-2005 17:15:45  
Don, there was no other baler model made during the 77 series era. New Holland started with the model 73, than made the 75, followed by the 76 and than the 77 and Super 77. Following the S77 in 1954, New Holland came out with the small model 66. Steve



[Log in to Reply]  [No Email]
James2

05-11-2005 08:16:14




Report to Moderator
 Re: What is bigger than a New Holland 77 baler? in reply to Steve from New Holland, 05-11-2005 04:30:56  
Steve:
In the early 50's I thought that we owned a model 78 which had spoked rims/wheels and Wisconsin V4. It had a chain suspended platform/board on the right side just behind the knotters so one could ride and check for untied bales. I don't believe there was one on the left. I don't think it had a canvas feed to the top cross auger, but I'm not totally sure about this aspect. I do remember the wad board going up and down, packing the hay/straw into the plunger's bale chamber. The neighbor had a model 77 which was newer, slightly smaller, and had more modern appearing, non-spoked rims. I was very young and was somewhat frightened by the loud V4 engine. Pulled it with an IH model H. Please correct me on the model or any of the baler's details if I'm wrong.

[Log in to Reply]  [No Email]
Ernie Bob

05-10-2005 18:44:59




Report to Moderator
 Re: What is bigger than a New Holland 77 baler? in reply to Don Livingston, 05-10-2005 17:15:45  
Don,

I believe the Model 80 was alittle bigger, I just traded away my NH 80. I don't know how many tons/hour it was rateded at but it would put out 100 lb. bales without any problem. The 80 was a wire tie, wasn't the 77 twine? That baler was a lot of fun to operate and it brought back fond memories of my childhood.

Thanks!
Ernie Bob



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy