Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Jerry D in N C

Welcome Guest, Log in or Register
Author 
Jimmy King

03-17-2005 04:51:31




Report to Moderator

Jerry I just read your earlyer post about the 260 teeth. Your New Holand dealer is full of crap, he is either out of the teeth or doesn"t stock them. Rubber mounted or steel teeth for a 260 are the exact opposet of the teeth for a 258 or 256. I used the rubber mounted on my rakes, but rubber or steel they are different. The teeth on the reel of a 495 haybind are different on each end.




[Log in to Reply]   [No Email]
Jerry D in NC

03-17-2005 07:57:47




Report to Moderator
 Re: Jerry D in N C in reply to Jimmy King, 03-17-2005 04:51:31  
I am beginning to think you are correct. Got on Shoups site last night and found right hand rubber teeth but no right handed metal ones. Do you know if the right handed metal teeth exist????

BTW Rake teeth are going out of sight. Agri Supply has just raised their aftermarket teeth over $1.50 and the NH teeth are $1.35 right now but going up next order. Shoup still at $0.89 so I went ahead and ordered me 50 at that price before they go up too...

[Log in to Reply]  [No Email]
Jimmy King

03-17-2005 10:24:37




Report to Moderator
 Re: Jerry D in N C in reply to Jerry D in NC, 03-17-2005 07:57:47  
Jerry, I am not absolutly sure about steel, but rubber I am. Call this # and ask for Jim in parts, he is one of the best. I hope he hasn"t retired.
S & H Farm Supply
2520 N E Gate
Springfield, Mo. 65803
417 865 5252



[Log in to Reply]  [No Email]
Jerry D in NC

03-18-2005 12:11:51




Report to Moderator
 Re: Jerry D in N C in reply to Jimmy King, 03-17-2005 10:24:37  
You were right. Jim knew his stuff. There has never been a right hand metal tooth released for the NH 260 Rolabar rake and the correct part number for the Rubber teeth is 850614. Thanks for the help everyone....



[Log in to Reply]  [No Email]
Jimmy King

03-17-2005 10:22:21




Report to Moderator
 Re: Jerry D in N C in reply to Jerry D in NC, 03-17-2005 07:57:47  
Jerry, I am not absolutly sure about steel, but rubber I am. Call this # and ask for Jim in parts, he is one of the best. I hope he hasn"t retired.
S & H Farm Supply
2520 N E Gate
Springfield, Mo. 65803
417 865 5252



[Log in to Reply]  [No Email]
Jimmy King

03-17-2005 10:20:07




Report to Moderator
 Re: Jerry D in N C in reply to Jerry D in NC, 03-17-2005 07:57:47  
Jerry, I am not absolutly sure about steel, but rubber I am. Call this # and ask for Jim in parts, he is one of the best. I hope he hasn"t retired.
S & H Farm Supply
2520 N E Gate
Springfield, Mo. 65803
417 865 5252



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy