Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

WHITE 508 moldboard plow

Welcome Guest, Log in or Register
Author 
farmertee

02-26-2005 09:30:08




Report to Moderator

Does anyone know if the 508 plow is 18"? Also will my IH 1066 pull a five bottom?




[Log in to Reply]   [No Email]
FordTractorMan

03-07-2005 12:32:33




Report to Moderator
 Re: WHITE 508 moldboard plow in reply to farmertee, 02-26-2005 09:30:08  
A 1066 should pull 'er fine.



[Log in to Reply]  [No Email]
Wayne in Pa

02-26-2005 10:56:32




Report to Moderator
 Re: WHITE 508 moldboard plow in reply to farmertee, 02-26-2005 09:30:08  
The 508 plow can be eather a 16 or 18 in. I think it can be esily changed.



[Log in to Reply]  [No Email]
Sam in MI

02-26-2005 10:38:31




Report to Moderator
 Re: WHITE 508 moldboard plow in reply to farmertee, 02-26-2005 09:30:08  
My brother-in-law has a 508 that is 4-18"s, but I bet it was available in 16" also. On the 548 Olivers we had the 16" point had 4 bolts and the 18" had 5 that held it on to the frog. This would be one way to tell the difference. I would think a 1066 should have no problem with 5-18"s in any conditions.

Sam



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy