Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

John Deere pan plow

Welcome Guest, Log in or Register
Author 
gina

01-28-2005 14:09:53




Report to Moderator

i am looking for the replacement blades for a very old jd pan(rolling) 5 blade plow. we think they were 22inch,3/16 -1/4 in thick with a 3 in concave depth. the square center is 1 in by 1 1/8 in . everywhere we have checked they are offing disc blades. can you use a disc blade on this plow . they are thinner, will they work or does anyone know where to get what we need? thanks for your help !




[Log in to Reply]   [No Email]
nation brimm

01-31-2005 10:50:58




Report to Moderator
 Re: John Deere pan plow in reply to gina, 01-28-2005 14:09:53  
Tractor supply has 22" disk blades that are 7 gauge witch is very close to 3/16. The dish should be deep enough too. They are listed in the catalouge for 19.99 They also have 24" which are 1/4" thick.if those would fit ,thats what I'd try.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy