Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Ford 530,532,430 hay baler

Welcome Guest, Log in or Register
Author 
Keith ivie

01-18-2005 18:25:05




Report to Moderator

I need to find a needle for a 530, 532 or a 430 Ford wire hay baler. This baler is between 35 to 40 years old and runs great, but I broke a needle this summer and need a replacement. A new one is $238.00 and the whole baler only cost me $100.00. and I am not about to buy a new needle. Any information will help.




[Log in to Reply]   [No Email]
Dkteat

01-19-2005 11:24:56




Report to Moderator
 Re: Ford 530,532,430 hay baler in reply to Keith ivie, 01-18-2005 18:25:05  
Keith, I am looking for some parts for a 532 baler myself.I need one of the big springs on the intake sweeps.If I happen to find a parts machine I will be sure to let you know if it has any good needles on it.



[Log in to Reply]  [No Email]
Jerry D in NC

01-20-2005 15:39:42




Report to Moderator
 Re: Ford 530,532,430 hay baler in reply to Dkteat, 01-19-2005 11:24:56  
If you boys will contact me via email I may be able to help you both. I have unhid my address but it is nchillboy@aol-com. obviously remove the -



[Log in to Reply]  [No Email]
Dkteat

01-21-2005 19:42:57




Report to Moderator
 Re: Ford 530,532,430 hay baler in reply to Jerry D in NC, 01-20-2005 15:39:42  
Hey Jerry, I found a 532 baler less than 5 miles from my house. Its been sitting out for a couple of years but is complete.Gentleman that lives there is going to contact the owner and see if he wants to sell it.



[Log in to Reply]  [No Email]
Jim.UT

01-19-2005 09:32:52




Report to Moderator
 Re: Ford 530,532,430 hay baler in reply to Keith ivie, 01-18-2005 18:25:05  
You could probably find a whole 'nother parts baler for another $100 (or less)! I don't have a needle, but I've heard of guys welding broke ones with good results. Is that a possibility?



[Log in to Reply]  [No Email]
Jim.UT

01-19-2005 09:36:57




Report to Moderator
 Nevermind! in reply to Jim.UT, 01-19-2005 09:32:52  
I just saw your earlier post where mention it has already been welded numerous times.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy