TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

The Quest for a 10 Cent piece

Welcome Guest, Log in or Register

Author

Joe in Houston

10-06-2004 14:13:31

Report to Moderator

I have a Wagner WM3 loader that leaks around the pistons in the Hydraulic Control levers. I finally tracked down a manual for the WM3. I am wondering if anyone can steer me to someone who might still make parts. I am looking for Valve Seal Assembly for the Hydraulic Control Valves (Wagner Part number 100-222-40-41-42).

Any ideas are greatly appreciated

[Log in to Reply] [No Email]

txblu

10-07-2004 06:47:15

Report to Moderator

Re: The Quest for a 10 Cent piece in reply to Joe in Houston, 10-06-2004 14:13:31

Joe, where you in Houston?

Mark

[Log in to Reply] [No Email]

stu in nj

10-06-2004 18:07:09

Report to Moderator

Re: The Quest for a 10 Cent piece in reply to Joe in Houston, 10-06-2004 14:13:31

Joe any good hydraulic repair shop should be able to get you the parts you need.I run a lot of old equipment and my local shop has been able to get me all the parts I need. hope this helps.stu

[Log in to Reply] [No Email]

Ol Chief

10-07-2004 00:49:25

Report to Moderator

Re: The Quest for a 10 Cent piece in reply to stu in nj, 10-06-2004 18:07:09

Joe; Since you are in Houston I may be able to help with some suggestions.When I lived there I often dealt with a hydraulic supply company name of WILCO.They are located in the port area on Armour drive which is just off of Clinton Drive. There are a number of hydraulic supply outfits within three or four block area.There is another co.on Clinton Dr.Just before you go under the rail road tressle, that is agent for Goodyear and the carry a complete line of hyd. equipment. Very helpful folks.I don't know where you are but you can reach Clinton Dr. by going East on Rt 10 to Lockwood Dr.turn rt.off 10 at Lockwood, then in about half a mile turn left on to Clinton. Within one mile you will come to a large RR overpass.Stay on ground level and look on your rt.for Armour Dr.turn rt.and watch on left side for Wilco.I now live in Fredericksburg,Tx.you can reach me at 1 830 997 8296 almost anytime if you need more help.Regards ,John Cooney

[Log in to Reply] [No Email]

txblu

10-07-2004 09:44:34

Report to Moderator

Re: The Quest for a 10 Cent piece in reply to Ol Chief, 10-07-2004 00:49:25

John, (Ol Chief, like in CPO, USN?)

Look in your phone book for a listing: Frederick S. Burg. Went to military school with him in Castroville, TX in the '50's. Sometimes, when no one was looking, would count cadence in German...Heinz,..... ..meya, Heinz..... .

Think he's related to the founding fathers? Naw; tall, blue eyed, blond hair, spoke fluent German. Grin.

Mark

[Log in to Reply] [No Email]

txblu

10-07-2004 09:43:05

Report to Moderator

Re: The Quest for a 10 Cent piece in reply to Ol Chief, 10-07-2004 00:49:25

John,

Think he's related to the founding fathers? Naw; tall, blue eyed, blond hair, spoke fluent German. Grin.

Mark

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy