Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Dimensions

Welcome Guest, Log in or Register
Author 
Steve (Magnolia

08-30-2004 09:56:05




Report to Moderator

I"m looking for physical dimensions for a couple of pieces of equipment, if someone could get them for me (we"re buying a baler and rake and they"re kinda far to be draggin" home behind the truck and I need to see if they"ll fit on the trailer).
I"m looking at a MF-124 baler and an AC-77 rake.
I"m more worried about the dimensions of the baler, so if someone could get me these measurements, I"d appreciate it;
1. Width - outside of the tires
2. Total length - from the tongue to the bale chute (in transport position)
3. Pickup lenght - Length from the pickup opening to the twine box (oposite side from the tongue/bale chute).

As for the rake;
1. Overall width - width of the bar, parallel to the wheels
2. Wheel width - width across outside of the wheels
3. Length - tongue to back of the wheels.

I appreciate any/all help....

Steve

[Log in to Reply]   [No Email]
Catskill Pete

08-30-2004 17:35:09




Report to Moderator
 Re: Dimensions in reply to Steve (Magnolia, TX), 08-30-2004 09:56:05  
Can"t help with the baler, but here is what the book says for a 77 G tread 5" 5-1/4" width 11" 4" length 10" hieght 4" weight 980lbs



[Log in to Reply]  [No Email]
Steve (Magnolia, TX)

08-31-2004 06:25:38




Report to Moderator
 Re: Dimensions in reply to Catskill Pete, 08-30-2004 17:35:09  
Great!!

Thanks,
Steve



[Log in to Reply]  [No Email]
cat

08-30-2004 11:22:30




Report to Moderator
 Re: Dimensions in reply to Steve (Magnolia, TX), 08-30-2004 09:56:05  
I sold a couple of pull combines to a distant buyer who needed the dimentions and I measured it for him.



[Log in to Reply]  [No Email]
Steve (Magnolia, TX)

08-30-2004 09:57:43




Report to Moderator
 Re: Dimensions in reply to Steve (Magnolia, TX), 08-30-2004 09:56:05  
BTW... Just in case you"d rather email... I"ve unhid my address, on this post (just remove the space after the "@" sign).

Thanks, again...

Steve



[Log in to Reply]  [No Email]
Steve (Magnolia, TX)

08-30-2004 09:57:16




Report to Moderator
 Re: Dimensions in reply to Steve (Magnolia, TX), 08-30-2004 09:56:05  
BTW... Just in case you"d rather email... I"ve unhid my address, on this post (just remove the space after the "@" sign).

Thanks, again...

Steve



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy