Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Thanks for info on Best Square Baler

Welcome Guest, Log in or Register
Author 
Mark

06-15-2004 09:50:14




Report to Moderator

Thanks everyone!! This has to be the best site for people that need & likes to help other people with their advise & futher dreams on making & taking care of animals & needs to do so! A custom baler has a JD 347 square baler and wants $ 6,000.00 for it I was thinking on speading no more than $4,500. Oh well I wait till winter maybe I will find a nice single owner that has a nice NH or JD Sqaure Baler Thanks!

[Log in to Reply]   [No Email]
Craig M in NC

06-16-2004 07:46:30




Report to Moderator
 Re: Thanks for info on Best Square Baler in reply to Mark, 06-15-2004 09:50:14  
I think that these guys are right about taking your time and looking around. You can find a good used baler if you have time on your side. I bought a JD 24T from a small farmer who had stopped baling his own hay and went to large round bales. Although the baler was pretty old it was almost like new. Everything was tight and it has served me well for about 12 years baling between 2 and 4 thousand a year. Good luck in finding a good baler.

[Log in to Reply]  [No Email]
FC

06-16-2004 06:56:31




Report to Moderator
 Re: Thanks for info on Best Square Baler in reply to Mark, 06-15-2004 09:50:14  
I agree with JC. Shop around and find a baler from a small operation. I recently bought an older Ford baler which has not seen a lot of use. The paint was not worn off the pickup and it had been shedded all its life or so it appears. Yes, it is old (approx. 25 years), but it rolled into the field and after about 10 hit and miss it ties every bale. Cost for this baler? $900 at a John Deere dealer (which in my opinion means I paid too much). I did not want to tie up that much money in one as I am only going to bale 50 acres at the most per year, and probably not even that due to time constraints. Be careful, as at least here there is a lot of worn out junk out there.

[Log in to Reply]  [No Email]
SPEEDWAY SQUARE BALING

06-15-2004 19:21:45




Report to Moderator
 Re: Thanks for info on Best Square Baler in reply to Mark, 06-15-2004 09:50:14  
i'm one of those custom balers and my advise is DON'T BUY ANYTHING FROM A CUSTOM OPERATOR. if you only knew how many bales i lay down in a year you would run from my baler and it looks brand new,my opinion HESSTON KNOWS HAY look for a 4570 or a case international 8530 same baler both made by agco... thats my opinion and with that said, my opinion and $2.25 would buy a could beer anyplace in oklahoma.
speedway

[Log in to Reply]  [No Email]
Warren Hagen

07-11-2006 16:25:13




Report to Moderator
 Re: Re: Thanks for info on Best Square Baler in reply to SPEEDWAY SQUARE BALING, 06-15-2004 19:21:45  
8530 Case international square baler is great. I actually have one of my fathers that we are selling. I have a number of photo's. Has always been in the machine shed and used minimally. We stopped milking cows and only use the round baler. Todays date 7/11/06



[Log in to Reply]  [No Email]
JC

06-15-2004 14:51:49




Report to Moderator
 Re: Thanks for info on Best Square Baler in reply to Mark, 06-15-2004 09:50:14  
First, you are right about the great folks who contribute to this site!

No offense meant to any custom haying outfits, as I have done some of that myself. But personally, I would steer clear of any equipment that was used as hard as a custom haycrew would run it.
Although they may have treated it right and maintained it, it still has most likely seen many tons of hay. And, I would imagine there would be a reason a hay company would want to sell it.....

Personally, I would go to estate auctions of smaller farmers.
Most likely you will find an older model with relatively few hours on it. You would also be able to stay in budget.

I just bought a 30 year old drill on an estate auction. The gentleman farmed only 40 acres and died at 90 years of age. He retired and put his equipment into storage in 1980, so he only used it for a couple of years, so it is in great condition.

My only competition for it was the scrap iron dealer and I got it for $15.00.

This may be extreme, but there are good deals out there. Talk to area auctioneers and get on their mailing list for upcoming auctions.

Hope this helps and good luck!

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy