Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Kewanee 10 ft disc

Welcome Guest, Log in or Register
Author 
Mark

06-10-2004 20:07:04




Report to Moderator

I've got a 10 ft disc of this brand that I'm desperately looking for brochures on. I've found very little info but I know it's out there. I'm looking for a very specific photo that I can repaint off of and show proper decal placement. The disc I have is mechanically almost like new but just needs paint as it is just surface rust all over. Someone did take care of it as best they could because every adjustment works and every bearing takes perfect grease and all gangs roll over nicely. Even the wheel seals and bearings are very tight. It's a keeper but as with the rest of my stuff it needs to look the part so I need this help if at all possible. Some of you are very knowledgeable and probably know who I need to talk to so please point me in their direction.

[Log in to Reply]   [No Email]
Scotty

06-13-2004 01:58:42




Report to Moderator
 Re: Kewanee 10 ft disc in reply to Mark , 06-10-2004 20:07:04  
Forgot to mention that I have "Product Literature for the Kewanee #400 disk. It was made in the 1980's, & into the early 1990's. The Literature was given to me by the sales person in Feb of 1990. My father owns what I believe is a #100 14' disk. So I have a question for You?

Does the one You have Have the frame on the perimeter of the disk, or do the gangs stick out a few feet past the square frame work? The older designs have the suared off frame at the end rear blades

[Log in to Reply]  [No Email]
Mark

06-13-2004 06:56:56




Report to Moderator
 Re: Re: Kewanee 10 ft disc in reply to Scotty, 06-13-2004 01:58:42  
This one has the frame that encircles the whole gangs. I've tried the dealer closest to me and they really didn't try too hard to see if they could find a manual. I've run across dealers that are really into the antiques of their brands and some dealers that cold care less so I may need to check the net for more dealers in the state. Thanks, Mark



[Log in to Reply]  [No Email]
Scotty

06-13-2004 01:43:24




Report to Moderator
 Re: Kewanee 10 ft disc in reply to Mark , 06-10-2004 20:07:04  
Have You tried a Kewanee dealer! A parts or owners manual may still be avialable for it!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy