TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Allis-Deutz 1.50 rotary rake...3-Point..

Welcome Guest, Log in or Register

Author

Ron

04-18-2004 20:44:03

Report to Moderator

Allis-Deutz 1.50 rotary rake...3-Point..

----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- --

[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- --

Posted by Ron on April 16, 2004 at 21:57:30 from (64.12.116.10):

Would someone have an operator's manual for this, OR give me the settings to set it...??

My friend has this and has broken 2 pto shafts, last year...has NO manual for it..
It brakes just behind the rear universal joint..
Sounds like it should be lower in the front, to straighten out the pto shaft a little..
Nice looking rake, but he don't trust it..!!
Thanks...!!
Ron.

[Log in to Reply] [No Email]

Mark

04-19-2004 13:50:51

Report to Moderator

Re: Allis-Deutz 1.50 rotary rake...3-Point.. in reply to Ron, 04-18-2004 20:44:03

You want it adjusted so it is lower in the front,just so the fingers are about 1-2" off the ground,so you are only raking/tedding the hay once. If it is set level it will want to spool hay around the baskets,dig in the ground and not do a very good job. Another thing to check is pto binding when raised,you may have to set your upper stop so it doesn't raise to full height,and break the joint. This may be what was happening with the previous owner.It is made to be used on a smaller 20-40 hp tractor.

[Log in to Reply] [No Email]

Ron

04-21-2004 20:15:10

Report to Moderator

Re: Re: Allis-Deutz 1.50 rotary rake...3-Point.. in reply to Mark, 04-19-2004 13:50:51

He is using a : 530, 620, and a 730 D on it...

Thanks for the input, I will give it to him...!!

Thanks..

Ron..

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy