TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

McCormick Silage blower info needed

Welcome Guest, Log in or Register

Author

Jesse Landre

03-21-2004 19:16:42

Report to Moderator

I have an IH McCormick silo blower with the long chute in front that feeds the silage into the blower with a rubber belt like on round balers. It is not the old silo filler with the blades that chopped the cornstalks, I have one of these as well. I was wondering if anyone knew when these were made or had any info on them such as parts or value. I can't seem to find info anywhere. Maybe it is just a rare silo blower. The only thing I need for it is the conveyor belt which is about 14" wide by 25 feet long. If anyone knows where I can find a reasonably priced place to buy conveyor belts or any other info on this blower, email me at [email protected] Thanks!

Jesse

[Log in to Reply] [No Email]

Jesse Landre

03-25-2004 06:42:07

Report to Moderator

Re: McCormick Silage blower info needed in reply to Jesse Landre, 03-21-2004 19:16:42

Thanks for the info everyone!

Jesse

[Log in to Reply] [No Email]

Buck

03-23-2004 16:31:58

Report to Moderator

Re: McCormick Silage blower info needed in reply to Jesse Landre, 03-21-2004 19:16:42

Fleet Farm might have a belt, I do not know
if they have them 14" wide. Maybe they could
special order it.
I remember seeing a John Deere blower
in the 60's like that.
Buck

[Log in to Reply] [No Email]

Al Hanson

03-22-2004 18:39:44

Report to Moderator

Re: McCormick Silage blower info needed in reply to Jesse Landre, 03-21-2004 19:16:42

Jesse,

IH made a model 40 universal blower with a belt feed long hopper on it in the 50's and a model 45 in the early 60's.

[Log in to Reply] [No Email]

Roger A. NY

03-22-2004 13:10:46

Report to Moderator

Re: McCormick Silage blower info needed in reply to Jesse Landre, 03-21-2004 19:16:42

Jesse, We had one of these table blowers in the 1950's, made by IH. I don't know the years made but I think they started in the early 50's and I believe they were available for some time.

A few years ago I got a new belt, for a self unloading wagon from a guy in western NY or Ohio whose name I can't think of right now. He used to advertise in the Country Folks paper, a paper for farmers here in the northeast, but I don't remember seeing his ad lately. I just remembered that I think it was Gable Belts but I don't have a phone no. or anything or even the town. Some equipment dealer might be able to tell you of a belt supplier.

This outfit could give you any width and length as well as a smooth belt or one more agressive with raised ribs on it. I liked the one with ribs on better as it kept the material feeding better but it was not unusual for the silage to bridge up and not feed. Then you would have to break it down but BE CAREFUL AND NOT LOSE THE FORK INTO THE BLOWER, not good!

Good luck! I hope I have been of SOME help. Roger

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy