TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Hesston auger repair?

Welcome Guest, Log in or Register

Author

Fern(Mi)

03-11-2004 17:57:56

Report to Moderator

Nea desprite. This machine missed last season's harvest. Need 12' auger replacement. Picture doesn't show deteriation. The auger's bent twice, rusted so thin I fear turning it will distroy whats left of an usable pattern if it comes to that. Would acually like another, regardless some rust. Capable welder.
Then again if I could find someplace to roll new sheet metal. Only bad part in entire machine is this cussed paper thin Auger. Great mower conditioner for small fields. Quick turn arounds I'm back before I get there.

[Log in to Reply] [No Email]

Jim in michigan

03-13-2004 08:02:19

Report to Moderator

Re: Hesston auger repair? in reply to Fern(Mi), 03-11-2004 17:57:56

fern,,there is a small welding shop about 20 miles from me that makes augers...R&D welding and fabricating in Bergland Mi do a search and you can find him I think,, he does great work at reasonable prices,,,Jim

[Log in to Reply] [No Email]

Yo Jim Fern(Mi)

03-13-2004 08:27:10

Report to Moderator

Re: Re: Hesston auger repair? in reply to Jim in michigan, 03-13-2004 08:02:19

I might have been in your area. used to spend a lot of time at James Lake just east of Watersmeet.

The best times I had was when I had gottten to far into the wilderness to walk back out before Sun down. Worried my old man something awful. I'd sleep curled up undwer the loving bows of a pine tree, coming out hungrier than a Spring bear. We go get something to eat. He'd got to bed having worried all night about me. I'd go back u\out and find a new place to get lost.

Don't think it would be near as much fun now, the DNR having cut in somany new forest roads.

Close to 600mi from here I'll gve it some thought. I loved that forested country.
Thanks

[Log in to Reply] [No Email]

Jim in michigan

03-13-2004 08:32:02

Report to Moderator

Re: Re: Re: Hesston auger repair? in reply to Yo Jim Fern(Mi), 03-13-2004 08:27:10

I am 23 miles North of Watersmeet.. we have some great country up here,,I am roughly 30 miles east of Porcupine mountains and 60000 and some acres of virgin woods...Jim

[Log in to Reply] [No Email]

Fern(Mi)

03-13-2004 08:44:45

Report to Moderator

Re: Re: Re: Re: Hesston auger repair? in reply to Jim in michigan, 03-13-2004 08:32:02

Think A bit further North, Ontnogan River. Visited that area walking 20' feet or more on tree trunks of tobbled trees that couldn't get a good root hold on the rocks. Blood-red that creek passing though that ore country.

[Log in to Reply] [No Email]

Jim in michigan

03-13-2004 17:59:25

Report to Moderator

Re: Re: Re: Re: Re: Hesston auger repair? in reply to Fern(Mi), 03-13-2004 08:44:45

The South Branch,Middle Branch and the east branch of the ontonagon river are all within 10 miles of me,,I used to trout fish on the middle branch when I was a kid,, South Branch is good farther upstream from here....Bergland is 20 miles west and has Lake Gogebic, Walleye capital of the world,,,I am surrounded by lakes, rivers and streams, all good fishing,,,Jim

[Log in to Reply] [No Email]

Fern(Mi)

03-14-2004 08:19:43

Report to Moderator

Re: Re: Re: Re: Re: Re: Hesston auger repair? in reply to Jim in michigan, 03-13-2004 17:59:25

You're just a bit north of Bruce's crossing. Somewhere near there I had tracted a bear three days only to have pushed him out onto an open road were somebody else shot him. That was my last bare hunt. Went with clothes on after that.

[Log in to Reply] [No Email]

Jim in michigan

03-14-2004 16:29:04

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Hesston auger repair? in reply to Fern(Mi), 03-14-2004 08:19:43

I am 5 miles North west of Bruce Crossing... head west on M28 towards Ewen and then turn on my road,,I am 5 miles from bruce crossing and 5 miles from ewen,,,,Jim

[Log in to Reply] [No Email]

Farmer Tom

03-12-2004 06:22:29

Report to Moderator

Re: Hesston auger repair? in reply to Fern(Mi), 03-11-2004 17:57:56

Maybe these folks could help you. They have a big metal shop and build combine header augers.

Schmidt Machine Company, Upper Sandusky OH 800-589-3814 (www.schmidtmachine.com)

(I don't work for them, just know of them as a Ag equipment dealer)

[Log in to Reply] [No Email]

JMS/MN

03-11-2004 18:10:53

Report to Moderator

Re: Hesston auger repair? in reply to Fern(Mi), 03-11-2004 17:57:56

Howard Machine, Howard, SD, and an outfit in Blooming Prairie, MN, roll/rebuild combine header augers. Don't know if they do swathers.

[Log in to Reply] [No Email]

Another Full Picture....

03-11-2004 18:07:26

Report to Moderator

Re: Hesston auger repair? in reply to Fern(Mi), 03-11-2004 17:57:56

....of Hesston 500 12' self-propelled hay-conditioner.
Great Machine for cutting small hay field. Quick turns I'm coming back before I've gotten there. Appreciate any help.
Fern(Mi)

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy