Schematic needed for Cat. 1 3-pt. tool bar

Spent about $65 in steel. And welded one together in an afternoon.

Used 1 3/4" square tubing for the main frame. 7' wide by about 2' long (wide enough to cover rear tires). Made the "rectangle" with a couple of cross braces inbetween. When looked at from top down, it looks like 3 rectangles welded together. Used 1/2" X 2" flat iron on "edge" for the attachment arms welded to the top of the main frame. Made an A frame on top of that for the third arm 3/8" X 2". One support arm going down from the top of the A to the frame. Put 11 S tines with 2" shovels staggered front and back for a finished 6" spacing.

I use it to work up the riding arena for the horses. Works great behind the 8n. I did have to add a couple of cinder blocks for added weight, but it looks and works like a store bought one.

Remove 123 in email addy