Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

276 versus 273 New Holland Baler

Welcome Guest, Log in or Register
Author 
Colin Niehus

07-30-2003 20:48:06




Report to Moderator

What are people's opinions on these two small square balers? Thanks for any help you can give me.




[Log in to Reply]   [No Email]
Steve from New Holland

07-31-2003 04:37:44




Report to Moderator
 Re: 276 versus 273 New Holland Baler in reply to Colin Niehus, 07-30-2003 20:48:06  
Both are or at least were good balers. They were made basicly at the same time. The 273 was the small baler, the 276 was the medium one and the 277 would have been the big baler of that era. If either one is in decent condition, I would own it. Steve



[Log in to Reply]  [No Email]
lpc

07-31-2003 23:41:59




Report to Moderator
 Re: Re: 276 versus 273 New Holland Baler in reply to Steve from New Holland, 07-31-2003 04:37:44  
Steve, would you explain the "small/big" in your post? Bale size, physical size or output capacity? Thanks, Loren.



[Log in to Reply]  [No Email]
Steve from New Holland

08-01-2003 04:34:23




Report to Moderator
 Re: Re: Re: 276 versus 273 New Holland Baler in reply to lpc, 07-31-2003 23:41:59  
Loren, that is an excellent observation. I should not have used the terminology that I did. In my area of the country here in New Holland, we basicly only sell 14"x18" balers. I rarely see anything bigger. So, from my standpoint, small,medium,and large only applies to the 14"x18" balers. This obviously is not correct as balers are made in 16"x18", 16"x22and23" bales and of course the real big balers as well. But for me, small, medium, and large refers to capacity among the 14"x18" balers only. Thanks for the question, Steve

[Log in to Reply]  [No Email]
lpc

08-01-2003 19:00:39




Report to Moderator
 Re: Re: Re: Re: 276 versus 273 New Holland Baler in reply to Steve from New Holland, 08-01-2003 04:34:23  
Just glad you took time to explain it to me. I'm wanting to make my situation considerably more time efficient and your post fit in with my learnings. If you'd explain something else to me it'd be a big help. In what way are the different balers capable of different outputs? Strokes/min., stroke length(more hay in per stroke means more out per stroke? Another method I haven't considered? Loren.



[Log in to Reply]  [No Email]
Steve from New Holland

08-02-2003 04:35:14




Report to Moderator
 Re: Re: Re: Re: Re: 276 versus 273 New Holland Bal in reply to lpc, 08-01-2003 19:00:39  
Loren, strokes per minute is of course one of the ways to increase capacity. But pickup speed, size of feeder area as well as the size of the opening into the bale chamber all are part of the equaztion for capacity. Also, don't forget about bale chamber size as well. Steve



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy