Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

New Holland model 68 baler

Welcome Guest, Log in or Register
Author 
R. L. Allen

07-24-2003 20:05:01




Report to Moderator

We have acquired a New Holland Model 68 baler and know next to nothing about balers. Any info. would be appriciated. Opperations, manuals, possible problems??? Thanks a bunch!




[Log in to Reply]   [No Email]
John in IN

07-25-2003 15:25:41




Report to Moderator
 Re: New Holland model 68 baler in reply to R. L. Allen, 07-24-2003 20:05:01  
Call 800-635-4913 for manuels or any New Holland Dealer should be able to help. Almost any part I needed was on the shelve and I did a complete restoration and I needed a lot of parts. Part prices I thought were reasonable. I had a lot of info and help from this forum. There are a lot of 68's out there. Do a search on 68's and you should have all the info you need. Good Luck.



[Log in to Reply]  [No Email]
John in IN

07-25-2003 15:23:42




Report to Moderator
 Re: New Holland model 68 baler in reply to R. L. Allen, 07-24-2003 20:05:01  
Call 800-635-4913 for manuels or any New Holland Dealer should be able to help. Almost any part I needed was on the shelve and I did a complete restoration. Part prices I thought were reasonable. I had a lot of info and help from this forum. There are a lot of 68's out there. Do a search on 68's and you should have all the info you need. Good Luck.



[Log in to Reply]  [No Email]
Fyrman 904

07-25-2003 20:21:37




Report to Moderator
 Re: Re: New Holland model 68 baler in reply to John in IN, 07-25-2003 15:23:42  
Your best bet after ordering the manual, is to look in the archives on this site. LOTS of good information to be found there. Manuals are taking a long time to come in right now, I've been waiting for one for my NH S68 for 5 weeks now. Good luck, and have fun with your new toy.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy