|
kydirtfarmer
07-21-2003 03:48:28
|
We still use a moldboard plow. I have a set of 4x14", semi-mounted JD plows. I spent the past year, looking for a good deal on a set of 3x16". Well, I found a set. The guy that I bough them from, said something was wrong with them, and he just wanted to get rid of them. I didn't see anything too out of shape, so I bought them. They are an older set, maybe 1960. Trip beams, new points, shins, landslides, and moldboards made it as good as new. I got it home, hooked it to the tractor, and something didn't look right. It took a minute before it dawned on me. The drawbar was in upside down. A couple minutes later, with it fixed, I decided that it was a good deal, at $100. Now I need to figure out what it is. I found what appears to be an IH cast into the coulter hubs. That is the ONLY identifying mark on it. What are some of the International plow models of the day? It is a truss frame, three bottom, 16", catagory 1 three point hitch plow. If I know where to start looking, I might find out what I've got. Thanks for helping, Bill
|
|
|
|
