Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Sharping blades on woods mower

Welcome Guest, Log in or Register
Author 
scott

05-19-2003 14:04:54




Report to Moderator

Need to sharpen the blades on a Woods 6ft finish mower. Sorry, but I do not know the model #. Are the threads left handed on all Woods mowers of this size?
Will an impact wrench loosen the nuts or will I need a cheater bar?
Can I hold the blades from spinning by blocking with a peice os 2X4?

Thanks in advance!!!!!




[Log in to Reply]   [No Email]
Lyle (Sask)

05-21-2003 12:21:24




Report to Moderator
 Re: Sharping blades on woods mower in reply to scott, 05-19-2003 14:04:54  
Hi, If you don't mind getting down in the dirt, just take the mower off, tip it up on it's end, and have at those blades with a 4" angle grinder.

On my 48" finish mower I'll lift the mower completely with the 3pt hitch, stop and shut off the tractor, and then just use something to block the mower so it can't drop by accident for a blade tuneup...

Amazing how much difference sharp blades make to the ease and quality of cut.

Lyle.

[Log in to Reply]  [No Email]
TGIN

05-20-2003 16:30:07




Report to Moderator
 Re: Sharping blades on woods mower in reply to scott, 05-19-2003 14:04:54  
Some are left and some right , hence modle R59 and L59



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy