Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Roto Baler

Welcome Guest, Log in or Register
Author 
Deamer

08-05-2002 05:44:50




Report to Moderator

Recently purchased some ground from the estate of an older gentleman..Inside the machine shed is two AC Roto Balers, and a AC pull type combine. They have been sitting there for approximately twenty years or maybe more. They appear to be in good condition except for tires (all flat). Belts are on and not rotted. I know nothing about them, don't need them, and want to move them out for the room. Any interest out there? Feel free to query, I'll attempt to answer any/all questions. Next trip out I'll get some photos with the digital camera and can send them to you then. Deamer

[Log in to Reply]   [No Email]
Old Iron

08-05-2002 20:33:10




Report to Moderator
 Re: Roto Baler in reply to Deamer, 08-05-2002 05:44:50  
Deamer,

I'll take some pics if you have any handy.

By the way, what model is the combine.

My 2 bits worth,

Old Iron



[Log in to Reply]  [No Email]
combine boy

08-05-2002 12:27:13




Report to Moderator
 Re: Roto Baler in reply to Deamer, 08-05-2002 05:44:50  
dose the combine have canvas is it good/ or is the combine an auger type.

combine boy



[Log in to Reply]  [No Email]
combine boy

08-05-2002 12:27:07




Report to Moderator
 Re: Roto Baler in reply to Deamer, 08-05-2002 05:44:50  
dose the combine have canvas is it good/ or is the combine an auger type.

combine boy



[Log in to Reply]  [No Email]
combine boy

08-05-2002 12:26:46




Report to Moderator
 Re: Roto Baler in reply to Deamer, 08-05-2002 05:44:50  
dose the combine have canvas is it good/ or is the combine an auger type.

combine boy



[Log in to Reply]  [No Email]
sorry about all of the repeats

08-05-2002 12:32:36




Report to Moderator
 Re: Re: Roto Baler in reply to combine boy, 08-05-2002 12:26:46  
sorry



[Log in to Reply]  [No Email]
sorry about all of the repeats

08-05-2002 12:32:28




Report to Moderator
 Re: Re: Roto Baler in reply to combine boy, 08-05-2002 12:26:46  
sorry



[Log in to Reply]  [No Email]
sorry about all of the repeats

08-05-2002 12:32:00




Report to Moderator
 Re: Re: Roto Baler in reply to combine boy, 08-05-2002 12:26:46  
sorry



[Log in to Reply]  [No Email]
sorry about all of the repeats

08-05-2002 12:31:10




Report to Moderator
 Re: Re: Roto Baler in reply to combine boy, 08-05-2002 12:26:46  
sorry



[Log in to Reply]  [No Email]
Stan

08-05-2002 07:41:50




Report to Moderator
 Re: Roto Baler in reply to Deamer, 08-05-2002 05:44:50  
What part of the country?



[Log in to Reply]  [No Email]
Deamer

08-05-2002 08:23:29




Report to Moderator
 Re: Re: Roto Baler in reply to Stan, 08-05-2002 07:41:50  
Stan,
Thanks for the reply. Sorry about the omission of location. I'm in central Illinois. Near Champaign. How's that work for you? Deamer



[Log in to Reply]  [No Email]
kyle

08-05-2002 17:29:46




Report to Moderator
 Re: Re: Re: Roto Baler in reply to Deamer, 08-05-2002 08:23:29  
i need some parts for my roto-baler its the bis spring on the back that goes from top to bottom any help



[Log in to Reply]  [No Email]
Deamer

08-05-2002 23:13:04




Report to Moderator
 Re: Re: Re: Re: Roto Baler in reply to kyle, 08-05-2002 17:29:46  
Hi, I want to thank everyone for the input and questions. Seems Ya'll know more about these roto balers than I do. I haven't been around any type of these round balers for a very very long time. It was a surprise for me to see them in the shed. The next trip out.. I'll try to get some photos with the digital camera and I'll send them to anyone wanting to see them. The AC combine looks good too, but I didn't spend but maybe a minute about it..I stood in front of it, didn't even do a walk around etc. Had to keep a appointment. I do not know the model number, type or anything else at this time. I know it may sound silly, but I'll get you all better information upon my next visit to the site. It will probably be two weeks. Again, thank you all for the input. Deamer.

[Log in to Reply]  [No Email]
Deamer

08-05-2002 23:12:15




Report to Moderator
 Re: Re: Re: Re: Roto Baler in reply to kyle, 08-05-2002 17:29:46  
Hi, I want to thank everyone for the input and questions. Seems Ya'll know more about these roto balers than I do. I haven't been around any type of these round balers for a very very long time. It was a surprise for me to see them in the shed. The next trip out.. I'll try to get some photos with the digital camera and I'll send them to anyone wanting to see them. The AC combine looks good too, but I didn't spend but maybe a minute about it..I stood in front of it, didn't even do a walk around etc. Had to keep a appointment. I do not know the model number, type or anything else at this time. I know it may sound silly, but I'll get you all better information upon my next visit to the site. It will probably be two weeks. Again, thank you all for the input. Deamer.

[Log in to Reply]  [No Email]
Deamer

08-05-2002 23:09:52




Report to Moderator
 Re: Re: Re: Re: Roto Baler in reply to kyle, 08-05-2002 17:29:46  
Hi, I want to thank everyone for the input and questions. Seems Ya'll know more about these roto balers than I do. I haven't been around any type of these round balers for a very very long time. It was a surprise for me to see them in the shed. The next trip out.. I'll try to get some photos with the digital camera and I'll send them to anyone wanting to see them. The AC combine looks good too, but I didn't spend but maybe a minute about it..I stood in front of it, didn't even do a walk around etc. Had to keep a appointment. I do not know the model number, type or anything else at this time. I know it may sound silly, but I'll get you all better information upon my next visit to the site. It will probably be two weeks. Again, thank you all for the input. Deamer.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy