TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

JD NO 9 mower

Welcome Guest, Log in or Register

Author

Hilltopper

07-13-2002 18:03:45

Report to Moderator

Last week I bought a No 9 mower in good shape. It had been sitting in a barn for years, so the story goes. I cleaned it up. Put in new seals and painted it. When I went to install it on my 720 Deere I found it to be a quite a pain to get on. I had to move the brackets that clamp over the lift arms, but good news they were the correct ones for my lift arms. I did not have a book so I do not know how Deere recommends to go about installing them. I managed to get it on after about 2 hours with a floor jack on shop floor. It seems to me there must be a better way to do this. I did a lot of experimenting and figured out how to adjust the center member. Anyway I was pleased with how it mowed. It has a very high lift to the bar. If some one could post instructions or E_mail me on how to get it on and off I would appreciate it. I plan to order a manual soon. In the meantime I may need to remove it. Thanks

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy