Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Threading a 14T baler

Welcome Guest, Log in or Register
Author 
Frank Leany

07-10-2002 15:44:47




Report to Moderator

Can anyone tell me how to thread a John Deere 14T baler? Thanks.




[Log in to Reply]   [No Email]
Fudd@Work

07-10-2002 18:30:02




Report to Moderator
 Re: Threading a 14T baler in reply to Frank Leany, 07-10-2002 15:44:47  
Starting at the lid to the twine box, go under the tensioners by the hole and through the first set of guides. They are the white thingys that look like insulaters. Pull the twine down to the 2 other white guides. Sorry, I can't remember if there are 2 guides at each place or one. Go through this last set of white guides, under the bars that protect the needles and put a twine through the tip of each needle. I always put the twine from the left roll in the twine box through the left needle. Pull the twine back to the tensioner for the bale tension and tie them off. I then trip the baler by hand and let it cycle through a tying cycle. Hope this helps. I'm kinda fuzzy as I haven't done this since last summer.

[Log in to Reply]  [No Email]
Frank

08-02-2002 08:48:21




Report to Moderator
 Re: Re: Threading a 14T baler in reply to Fudd@Work, 07-10-2002 18:30:02  
Thanks a bunch for your help.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy