Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Mesurements of 3 point triangle

Welcome Guest, Log in or Register
Author 
chuck

05-24-2002 19:18:29




Report to Moderator

I want to make up a three point adaptor to hold a 2" reciver for a travel trailer and other ball type trailers. What I need to know (since i am at work and can not measure one of my implments)is what are the measurements of the triangle for the three point hitch.




[Log in to Reply]   [No Email]
BlueLite

05-27-2002 07:11:47




Report to Moderator
 Re: mesurements of 3 point triangle in reply to chuck, 05-24-2002 19:18:29  
Just a note about your setup. Make sure that the tractor side swivel where your going to attach your lift arms is directly below the attachment hole of your top link. If it is off
your top link arm will not make the same lift radius as your lower arms.

Doesn't seem like a big deal but when your trying to adjust the draft on a plow it's a real pain.



[Log in to Reply]  [No Email]
JMS/MN

05-25-2002 07:24:57




Report to Moderator
 Re: mesurements of 3 point triangle in reply to chuck, 05-24-2002 19:18:29  
Check with the asae home page. American Society of Agricultural Engineers.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy