Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Super? Six Loader

Welcome Guest, Log in or Register
Author 
Capt. Minx

11-04-2001 08:07:00




Report to Moderator

I recently purchased a Farmall M with a Super Six Loader. My only real complaint is the bucket only raises about 5 feet from the ground. Can longer hydraulic cylinders be installed on the loader to raise the bucket higher? Also, what would cause the hydraulic fluid to squirt out the vent holes on the cylinders when a load is in the bucket and the cylinders reach the full extension point? It's not a huge amount (maybe a teaspoon or so) but enough to have to wipe off the front of the tractor at the end of the day. Thank you for any info on this loader!

[Log in to Reply]   [No Email]
Jhill

11-05-2001 10:10:40




Report to Moderator
 Re: Super? Six Loader in reply to Capt. Minx, 11-04-2001 08:07:00  
The oil is getting past the piston seals in the cylinders and being forced out the vents at the end of the piston stroke.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy