Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

SAW

Welcome Guest, Log in or Register
Author 
Ray

09-02-2001 18:20:41




Report to Moderator

I just purchased a wood saw that is driven by a flat belt. I plan on using my Farmall "H" to cut wood with it. I paid $120.00 for it at a antique shop. I was wondering if I paid too much? It is the kind that you lift the log up on this L-shaped table and push the table towards the blade. The owner said that he would take it back if I am not happy with it. It is complete and the blade is in pretty good shape and sharp. The table moves freely and the bearings are not grinding. Did I pay to much or should I take it back. Thanks for the help.
Ray..

[Log in to Reply]   [No Email]
Jay

09-05-2001 08:59:01




Report to Moderator
 Re: SAW in reply to Ray, 09-02-2001 18:20:41  
Used one a lot more than I wanted to as a kid. One of my responsabilities was cutting the firewood. Be very carefull, they don't call them Widow Makers for nothing!



[Log in to Reply]  [No Email]
Ray

09-04-2001 03:35:28




Report to Moderator
 Re: SAW in reply to Ray, 09-02-2001 18:20:41  
Thanks everybody for the advice/help. I will check it over real good prior to reving the blade up to speed. Thanks again,
Ray....



[Log in to Reply]  [No Email]
Greaseman

09-03-2001 16:28:36




Report to Moderator
 Re: SAW in reply to Ray, 09-02-2001 18:20:41  
I have my Grandfather's Buzz saw from years ago. still works well for: poll wood. I still prefer a chainsaw though. Make certain that the nut that holds the blade on is: LEFT HANDED THREAD. Be careful not to get your fingers between the belt and pulley as it can do mightly bad things but quick. My Father caught his in one on a David Bradley sickle bar mower--now a shortend broke thumb.



[Log in to Reply]  [No Email]
John ne.

09-03-2001 10:11:47




Report to Moderator
 Re: SAW in reply to Ray, 09-02-2001 18:20:41  
Ray, compared to the price of a new chain saw, you'll get a lot of cutting done. Now, I've run one of these for over 30 years and: When you spin it up, let no one get in line with that saw blade for a couple of minutes, you don't know its history, chain up your dog, don't want him near it, or near your legs. Position it no nearer than ten feet from your wood pile, cut pieces that are easy for you to handle, six to ten feet, depending on whats comfortable, any longer and they bind the blade. Stop it to scoop the sawdust out from under, and stop it to clean up the chunk pile, unless you got a helper, thats tossing them to the pile. When at cutting speed, they WHIRRRRR pretty good, so get some ear plugs, you won't get a headache. Don't work over roots, rocks or anything on the ground, don't want nothing to trip your feet up, my grandpa slipped and cut his left arm nearly off, they saved it, and it was in the 40s, I'm still using the same saw on the front of my JD B. John in Ne.

[Log in to Reply]  [No Email]
paul

09-02-2001 20:17:38




Report to Moderator
 Re: SAW in reply to Ray, 09-02-2001 18:20:41  
I see them sell between $20 & 200 at farm sales, so you probably did just fine. Did you get a good belt with it, and did you get a good blade with it? Those are the 'finicky' parts.

If you can stand a bit of preaching, these things are very dangerous. I have one for my H as well, and I use it. Thereis no way to make them truely safe.... My neighbor (I never knew, this happened before I was around) had one where the big nut came loose, blade came flying off like a frizbee, cut his leg off, and he bled to death. A danger I wouldn't have thought of compared to the obviuos dangers - flying wood, binding blade, spinning blade...

I'm not saying not to use it and this is obvious: These things are a real safety hazzard. Always be totally alert.

--->Paul

[Log in to Reply]  [No Email]
ron

09-04-2001 10:39:04




Report to Moderator
 Re: Re: SAW in reply to paul, 09-02-2001 20:17:38  
Paul,
I agree completely on the safety issue. I believe I remember that you live near New Ulm. I live near Waseca. I have been to Farmamerica near Waseca several times and they have a saw like that mounted on an old F20 Farmall with absolutely no guards around the blade and they run it at shows where there are many people around watching. I stay far away. If I was in charge of that program, there would be NO running of that saw, PERIOD. Far too dangerous with a bunch of people around, many of whom don't understand the safety issues of that thing and stand way too close!

[Log in to Reply]  [No Email]
paul

09-04-2001 13:37:09




Report to Moderator
 Re: Re: Re: SAW in reply to ron, 09-04-2001 10:39:04  
Finally made it back to Pioneer Power this year, haven't been in LONG time.

Was surprised at the lack of 'overly cautious' roping & keeping people away. The old saw mill let you get up to lean on the building, within range of some odd wood chips. When they went on break, the workers had a beer. Only saw a few earplugs, no eye protection other than those wearing regular glasses, etc. We got to go up on top of the running diesel generator (is that thing massive!) while it was running, with the open gearing right there a foot from me & a rather flimsy catwalk. They started up the big black one, very little roping at all, could stand 3 feet from the 9-10 foot flywheel.... Tractors & golf carts were traveling all over the place willy nilly.

And so on.

It certainly made it authentic, I kinda liked it. But, I kept thinking that I would not want to be liability underwriter for the whole thing! That's a reflecion of my negative view of the USA liablity laws. I believe when people choose to participate in something of their own free will, or choose to travel onto non-public property, they also share in keeping themselves safe; it is not just up to the property owner to prevent any and all stupid itiotic move possible by any stupid itiot. This is an area where the Eorpoeans have a much better system from what I can tell.

I did see 2 tractor buzz saws at PP, but neither was in use that day.

--->Paul

[Log in to Reply]  [No Email]
leroy

09-03-2001 07:16:06




Report to Moderator
 Re: Re: SAW in reply to paul, 09-02-2001 20:17:38  
If that nut came off while running I would say that he had turned the mandrel around when building the saw and was running it backward, they are supposed to run in the direction that when running they actulay will work to tighten the nut.



[Log in to Reply]  [No Email]
paul

09-03-2001 18:03:33




Report to Moderator
 Re: Re: Re: SAW in reply to leroy, 09-03-2001 07:16:06  
Yup, my understanding is that whoever built the saw hadn't considered eft handed threads....

When you buy one at auction & don't know who built it, something to consider....

As the saw spins up to speed, and then spins down, esp with a big blade, it does put pressure in both directions...

--->Paul



[Log in to Reply]  [No Email]
bob

09-03-2001 10:27:14




Report to Moderator
 Re: Re: Re: SAW in reply to leroy, 09-03-2001 07:16:06  
agree with all posts and you will save the money not alone on chain saw repairs but if time is worth anything it will save a real bunch if belt is good a bargin just keep it safe



[Log in to Reply]  [No Email]
Cowboy Carl

09-02-2001 19:39:27




Report to Moderator
 Re: SAW in reply to Ray, 09-02-2001 18:20:41  
What you describe, we always called a "buzz saw". The name comes from the sound made when cutting. These cut one heck of a lot of firewood in this country. If the saw is sharp and straight you probable got a good deal. Cheaper than any working chainsaw!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy