Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

NH 77or87 Baler Need Parts

Welcome Guest, Log in or Register
Author 
Tom

04-02-2001 10:50:21




Report to Moderator

I need the parts to change my baler from engine to pto All the parts from gearbox back starting with the gearbox,the mounting brackets,shaft,shield,etc. If you have any of this please let me know. THANKS




[Log in to Reply]   [No Email]
Duner Wi

04-05-2001 17:56:50




Report to Moderator
 Re: NH 77or87 Baler Need Parts in reply to Tom, 04-02-2001 10:50:21  
I can't help you with PTO parts but I did change my bale size from 36 inches to 32 inches. I did not know NH77 had a PTO drive. I never saw one.



[Log in to Reply]  [No Email]
Tom

04-07-2001 20:06:44




Report to Moderator
 Re: Re: NH 77or87 Baler Need Parts in reply to Duner Wi, 04-05-2001 17:56:50  
Well let me reword that, The super 77 came with engine or pto and the 87 wire tie baler was either The Super 77 replaced the 77 but looks just like it with just a few improvements.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy