Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

Rino blade settings

Welcome Guest, Log in or Register
Author 
Scott

02-09-2001 17:22:23




Report to Moderator

I bought a RIno blade at auction and had a chance to use it today with 10 inches of snow. However I have a J.D. 3020 and been reading about the 3 point selector lever. it has L for Load control, LD for Load & Depth, D for Depth. Does anyone know what setting works best for blading. Ive been using the setting L. Thanks again
Scott




[Log in to Reply]   [No Email]
Kermit

02-09-2001 20:36:57




Report to Moderator
 Re: Rino blade settings in reply to Scott, 02-09-2001 17:22:23  
I'm certainly not an expert, but I'm going to say to use the depth setting. I think the load control is a draft control and if so probably wouldn't be right for that application to my way of thinking.



[Log in to Reply]  [No Email]
Jimbo

02-09-2001 18:19:34




Report to Moderator
 Re: Rino blade settings in reply to Scott, 02-09-2001 17:22:23  
I'd recommend a set of skid shoes for your blade.
This would keep it from digging into the soil/gravel/asphalt,ect. under most conditions. They are available from Rhino.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy