Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Discussion Forum

PTO Chipper?

Welcome Guest, Log in or Register
Author 
Shep

02-02-2001 16:46:47




Report to Moderator

While doing some iron horse logging the hard way I have learned about a logging arch. Hoping to build one soon.

While doing this kind of work always end up with lots of branches to be disposed of (burn etc.) Was looking into buying a chipper/shredder this summer and got thinking . . .

Does any co. make or anyone have plans or know of a chipper I can run off my PTO? Tractor will be out in the woods with me, may as well chip branches while there and later in the fall turn them under.

Thanks in advance.
Shep

[Log in to Reply]   [No Email]
Clay

02-25-2001 18:41:39




Report to Moderator
 Re: PTO Chipper? in reply to Shep, 02-02-2001 16:46:47  
Your Vermeer Ag dealer has a great pto chipper.
My brother-in-law is a Vermeer dealer in Alma, Kansas. He has sold a few.



[Log in to Reply]  [No Email]
Joe Evans

02-03-2001 21:48:05




Report to Moderator
 Re: PTO Chipper? in reply to Shep, 02-02-2001 16:46:47  
Check out www.befco.com.



[Log in to Reply]  [No Email]
Karl Bader

02-03-2001 13:00:44




Report to Moderator
 Re: PTO Chipper? in reply to Shep, 02-02-2001 16:46:47  
Yes they do make them. I saw one in I believe was a Nasco catalog.

Hope this helps!

Karl



[Log in to Reply]  [No Email]
Russ

02-02-2001 18:10:05




Report to Moderator
 Re: PTO Chipper? in reply to Shep, 02-02-2001 16:46:47  
Shep, have you got plans for a logging arch, or any ideas that seem like a useful feature? I`ve just started thinking I should build one also. Something I can pull with the drawbar on a Case crawler. I haven`t got any experience with an arch and I`m trying to take the easy way out on the design by picking other people`s brains for ideas. Thanks for any replies, Russ



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy