Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Implement Alley Discussion Forum

Modifying a disc

Welcome Guest, Log in or Register

04-22-2010 19:43:34

Report to Moderator

I have a disc that measures 8" across the rear set of discs when they are
> straight. I noticed tonight that the rear set has 7 discs on each side and
> the front section has only 6 and therefore is a little narrower. I have been
> pulling this around with my Farmall C for years.
> Now my acreage is in hay and the only thing I use my disc for it preparing
> the garden. Here are my questions.
> 1. Why is the rear gang one disc larger?
> > 2. I want to downsize the disc to make it easier to use in the garden. Can I
> remove a disc or two from each gang and replace them with a spacer of some
> sort? A five or six foot disc would be plenty for the garden and much easier
> to turn. This is a plain pull behind with no lifting mechanisim of any kind.
> > Thanks in advance for any advice.

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy