Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Woods L59 bearing and seal replacement

Welcome Guest, Log in or Register
Author 
Mike tn

04-04-2008 09:27:16




Report to Moderator

Need to put new seals and bearings in the spindles. Looks like the top bushing was pressed on. Any one have advise on rebuild these things.

Thanks, Mike




[Log in to Reply]   [No Email]
banjo

04-04-2008 23:54:25




Report to Moderator
 Re: Woods L59 bearing and seal replacement in reply to Mike tn, 04-04-2008 09:27:16  
All i can say is be careful getting the pulley off and on. that center bushing is wedged in there and it has to come off first before the pulley will. Also it has to be positioned right when reassembled so the belt will line up. I didnt go as far as the bearings so i dont know what it is like.



[Log in to Reply]  [No Email]
leroy in ne

04-04-2008 10:10:05




Report to Moderator
 Re: Woods L59 bearing and seal replacement in reply to Mike tn, 04-04-2008 09:27:16  
search for woods mower site. down load manual. helped me a bunch 2 years ago. leroy



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy