Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Tom From Ontario

Welcome Guest, Log in or Register
Author 
Earl-IL

03-05-2008 21:28:48




Report to Moderator

Tom ,Email me I have some information for you. Thanks Earl




[Log in to Reply]   [No Email]
Tom from Ontario

03-06-2008 07:48:45




Report to Moderator
 Re: Tom From Ontario in reply to Earl-IL, 03-05-2008 21:28:48  
Earl, many thanks for the contact. I was running out of hope for this thing. I will get it measured up and send you the info.
It is an IH model 39 two furrow reversible and I think 14". Mechanically good, but the shares are done like dinner. Boards are OK for now.
Would also like to inquire anything is still available for a Massey-F model 55 two furrow reversible. There is one not far away, if I can do a deal with the fellow.
Thanks
Tom

[Log in to Reply]  [No Email]
Earl -IL

03-06-2008 09:32:40




Report to Moderator
 Re: Tom From Ontario in reply to Tom from Ontario, 03-06-2008 07:48:45  
Hi Tom, I am associate with Crescent Forge & Shovel.Since 1902 they have worked through distributors.They manufacture many other products besides plow parts. Some of us have been able to buy a few shares & moldboards from them. This is changing now. I came on board with Crescent 2 -4-08 I have a good friend Kim Primmer that I have relied on to help research moldboard plows & the different bottoms. He has done a super job on the Deere plows & is working on the IHC plows.Other brands will follow. We will do the best we can to supply shares,moldboards & landslides. We will be asking for numbers off the shares,moldboards & frogs if you can find them stamped on the back.If you have any plow manuals with the OE numbers, that would help.We will have a limited supply of catalogs we could supply to your tractor clubs.Kim & I ran many gallons of gasoline through our tractors this fall & had a good time plowing.Contact me by email or phone. Thanks Earl In Illinois

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy