TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

JD 4250, will it handle a 956 disc w/impellers?

Welcome Guest, Log in or Register

Author

HAYBOY

02-21-2008 11:00:16

Report to Moderator

Just wondering if a 4250 (3000 hrs 4wd, weighted) will handle a 956 mower on hilly ground or am I asking too much of it? I am kinda leaning towards the 946 instead, because of extensive road travel. Do they make a tow behind cart for a 13 ft mower? Thanks in advance

[Log in to Reply] [No Email]

CumminsMan

02-21-2008 11:33:27

Report to Moderator

Re: JD 4250, will it handle a 956 disc w/impellers? in reply to HAYBOY, 02-21-2008 11:00:16

A very sure yes, its only a 14.6 foot machine, 100hp would pull it. Deere recommends 100-150 PTO hp. You could ditch the weights and still have plenty of tractor.

[Log in to Reply] [No Email]

RickB

02-21-2008 18:56:15

Report to Moderator

Re: JD 4250, will it handle a 956 disc w/impellers? in reply to CumminsMan, 02-21-2008 11:33:27

Ditching the weights is a poor idea, those mowers will toss a tractor around pretty good. A 4250 is a good match for a 946 in hilly ground running at or near 8 mph. A 7410 (105pto hp) runs completely out of steam in identical conditions. In fact, the 7410 I ran would not maintain 8 mph on any significant uphill grade.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy