Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

NH310 Baler capacity

Welcome Guest, Log in or Register
Author 
gas2

01-27-2008 18:25:19




Report to Moderator

Used to bale straw with an Oliver 50 Baler pulled by 14 year old on an 8n Ford. I combine the wheat with a 15' Head but only cut 10' to 12' to keep a small enough windrow for the baler to handle. Now I have a NH310 Hayliner! Can I now expect this baler to handle the volume of the 15' Head? THANKS!




[Log in to Reply]   [No Email]
WCS

01-29-2008 01:55:15




Report to Moderator
 Re: NH310 Baler capacity in reply to gas2, 01-27-2008 18:25:19  
I'm not sure an 8n Ford tractor has enough HP to run a 310 hayliner. More Hp on anything would be better. I used to run my 310 with a JD 3020 diesel (about 65 HP) and it seemed like a good match. Now I use even more HP since I upgraded to a newer tractor.



[Log in to Reply]  [No Email]
RickB

01-28-2008 03:25:00




Report to Moderator
 Re: NH310 Baler capacity in reply to gas2, 01-27-2008 18:25:19  
Depends on the wheat yield and how slow your tractor can go.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy