Front Loader for Super C

I see, both here and on other sites, that StanHoist made loaders for some of the IH/Farmall Line, though i've had no luck locating one that says, specifically, that it'll work for a 1954 Farmall Super C.

We had a Massey 135 here for a while, which had a front loader, and it proved very useful, which is why i'm investigating the existance and usefulness of a Super C front end loader.

Thanks for the replies!
Andrew in NS

I have 2 of them on Super C's there pretty handy the IH one can only be used with the narrow front. They can lift about 800 lbs or soo deping on how you hook. I mostly use ours for pushing some snow and or brush. For larger jobs i use a H with a loader but its a real bear to steer with no Power steeing. The only thing to mention is that the SC is frame less soo becarful how much weight you pick up or if you go over rough ground with it, Iv never seen but have heard that they can snap in half when over loaded too much :(

here is pic of my 53 Super C with the IH loader

As I said, I have the wide front end, so ideally, the loader would have to work with that. I don't think I'd be using the loader for much heavy lifting. The Super-C I'm getting comes with a snowblade (7' front/mid mount, I believe), so I'll be using that for pushing snow most of the time. I need to locate a mower, or modify the SuperA mower, but thats another discussion.

I only really want the front loader to move around some pieces of wood (stovelengths, stuff I haven't split yet, etc)...perhaps a shovel load of sand or rock, but nothing too heavy, and certainly not at speed over rough ground. The tractor is more than twice my age!

That Freeman 2000 loader looks interesting, though...If they're still around, I imagine they're both expensive, and not a bolt-on modification. Any more information on them? A google search turned up very little...

~AR