Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Implement Alley Discussion Forum

International 420/430 Balers

Welcome Guest, Log in or Register
Alan Whitaker

11-27-2007 19:01:21

Report to Moderator

Can someone tell me the difference between IH 420 and 430 balers?

[Log in to Reply]   [No Email]

11-28-2007 14:48:01

Report to Moderator
 Re: International 420/430 Balers in reply to Alan Whitaker, 11-27-2007 19:01:21  

As I remember from sales literature back then, the 420 had a cross feed with fingers somewhat similar to New Holland's, operated by some sort of cable arrangement. The 430 had an auger for cross feed. I have never used one and my recall of the mechanisms
may be incorrect.

The 420 was the lower capacity baler.


[Log in to Reply]  [No Email]

11-28-2007 04:40:13

Report to Moderator
 Re: International 420/430 Balers in reply to Alan Whitaker, 11-27-2007 19:01:21  
i had a 440 baler and it seems like i remember there being a difference in the size of the bale looking at the ends of them. i would think most parts would interchange. i tore the gear box up in mine and put one off of a 47 on it and it bolted right up.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy