Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

335 JD Round Baler

Welcome Guest, Log in or Register
Author 
riverdale

10-17-2007 07:17:19




Report to Moderator

Just looking for some thoughts/experiences with the 3-series John Deere Round balers as far as problems and using them for making baleage.




[Log in to Reply]   [No Email]
phillip d

10-17-2007 16:15:17




Report to Moderator
 Re: 335 JD Round Baler in reply to riverdale, 10-17-2007 07:17:19  
If a 335 is just a smaller version of a 435,than you would be getting a very good baler.They work fine for baleage.We ran a 435 for 8 years and hardly spent a cent on repairs,mainly just belts,which can be expected with any baler.As far as problems,I saw a post on here awhile back to periodicaly check the wear of the metal on the door over the roller's bearing housing,apparently it wears thin over alot of time and can be a problem if not detected on time.Wide pick up is an option that as far as I know wasn't available on those machines that is really nice.The one we had had automatic tie and it was a really nice reliable option.Best of luck,pd.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy