Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Need help identifying old folding harrow

Welcome Guest, Log in or Register
Author 
ksdaddy

08-26-2007 19:16:41




Report to Moderator

third party image

I bought a small spring toothed harrow to clean up my back yard, where I had some backhoe work done and also had some fill and topsoil brought in. I have a 1943 H (unrestored) and I wanted to put it to work besides pulling the rock cart around. I picked up this little harrow and folded it up into the back of the truck. It doesn"t weigh much. It had ropes and chains all over it which were junk. The two halves were joined by a common 1/2 rod that was all bent. I zipped it off with the grinder and replaced it with 3 5/8" x 4" bolts. This pic was taken after I cut the rod and I just stuck the pieces back in place to hold it together for the pic. I made two fairly short chains with j-bolts on each end that clip onto the drawbar nicely (not pictured). When it"s folded up (by lifting the center, NOT the sides!) it"s supposed to ride on two skinny little pieces of flat stock as skids. That doesn"t work so well, as the front still digs in. I don"t have a hydraulic cyl on the H yet so I can"t lift it easily to transport it. I did discover that, once folded, I could just flop it over on one side so the upper sides of the springs were riding on the ground... but I haven"t actually tried going across the lawn like that (yet). This little tool is vicious! I didn"t expect it to rip up my back yard quite so thoroughly. Of course it"s rained off and on for three days and my back yard has a lot of poorly drained soil, so I"m making more of a mess than anything right now. And ROCKS. Holy crap, every rock that was ever made and some freshly minted ones were pulled up by that little monster of a harrow.

So this little harrow is a double edged sword. It"s small, light, effective, and cost me $75. The down side is that I can"t figure out a way (or the proper way) to transport it. Does anyone recognize it at all, and if so, am I doing things right or am I way off base? Thanks in advance for any guidance.

[Log in to Reply]   [No Email]
55 50

08-27-2007 08:13:47




Report to Moderator
 Re: Need help identifying old folding harrow in reply to ksdaddy, 08-26-2007 19:16:41  
Never seen one just like that. Essentially it"s doing what it was designed to do! Get in there and dig! I don"t see the flat stock it"s supposed to slide on when folded. Is it light enough that a person can lift the center to fold it without assistance from others? It won"t make your "H" work. It is more of a toy than a load for your tractor. Up side down for transport seems logical to me.

[Log in to Reply]  [No Email]
Jim in Ma.

08-27-2007 07:54:25




Report to Moderator
 Re: Need help identifying old folding harrow in reply to ksdaddy, 08-26-2007 19:16:41  
How about just fold it up or flip it upside down and drag it to where you want to use it? Or carry it around in the pickup.



[Log in to Reply]  [No Email]
ksdaddy

08-27-2007 08:35:01




Report to Moderator
 Re: Need help identifying old folding harrow in reply to Jim in Ma., 08-27-2007 07:54:25  
That"s likely what I"ll do. I spoke to the previous owner on the phone just now and that"s basically how he used/transported it. Last week he simply told me to go get it, use it, then return it, and if it was in pieces, so be it, no big loss. I don"t like to do that, I"d rather just buy it and be done. He had built a new home a few years back and needed a harrow to landscape (like me!) and just used it for that one job. It was sitting atop an old disc harrow. He said he has more junk in the bushes.

I live in Caribou, ME so historically there has been tons and tons of old obsolete implements on rockpiles throughout the county, but #1 - people now want old plows on their front lawn as ornaments, #2 - More Amish are moving up here and want old steel wheeled stuff, #3 - scrap steel is $60 a ton so the rockpiles are getting cleaned with a vengeance. I was offered a 10" wide spring toothed harrow this weekend, no idea who made it or when, but it has a regular drawbar with a trip lever. I don"t know how these typically work but when you back up, it raises the tines up, so you can then move from A to B... then when ready, you just trip the lever and you"re good to go. It has been sitting for many years but it still looks fine. I could get it for $100 I think. I don"t NEED it now that I have the little fella up and running, but it"s a shame this may get crushed before winter. Better to put that money towards a roller or a homemade rock rake.

[Log in to Reply]  [No Email]
MNBob

08-28-2007 18:39:02




Report to Moderator
 Re: Need help identifying old folding harrow in reply to ksdaddy, 08-27-2007 08:35:01  
Dont know a thing about it, BUT-- I lived in Presque Isle while stationed at Limestone (Griffiss). Went through Carabou all the time. Great memories, hunting and fishing was good and the people were really great. Have a good day!!
Bob



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy