Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

john deere 60 powr trol

Welcome Guest, Log in or Register
Author 
chris ryan

07-22-2007 06:54:25




Report to Moderator

I have a john deere 60 and i was wondering if it is possible to add a dual remote control lever to the powr trol with out to many problems.




[Log in to Reply]   [No Email]
hayfarmer

07-22-2007 18:36:38




Report to Moderator
 Re: john deere 60 powr trol in reply to chris ryan, 07-22-2007 06:54:25  
You could put a Baker Valve between the power trol and housing. They were an after market deal to add hydraulics to ones without but could also be used on power trol. A lot of them in salvage yards.



[Log in to Reply]  [No Email]
Jim/Iowa

07-22-2007 09:56:22




Report to Moderator
 Re: john deere 60 powr trol in reply to chris ryan, 07-22-2007 06:54:25  
No. The ability to simultaneously operate two remotes AND a three point at the same time arrived on the 620 (and 520 and 720) in 1956.

It was called CUSTOM POWRTROL and won't bolt up to older tractors! Sorry!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy