Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Mccormick pickup baler ??45 or 46

Welcome Guest, Log in or Register
Author 
scott Dewitt

07-18-2007 03:41:51




Report to Moderator

I recently aquired a Mccormick pickup baler from a friend that was baling about a year ago . Until he had problems with the knotters He purchase a differant set of knotter from a old farmer and never installed. Thats where I have a problem any Ideas on the timing of the knotters ? I exhausted all the resources in my local town. I was only able to read mccormick on the rolled sheet metal behing the hay auger.the model number is only a guess from some picture that I found on Internet.

[Log in to Reply]   [No Email]
Leroy

07-18-2007 05:59:27




Report to Moderator
 Re: Mccormick pickup baler ??45 or 46 in reply to scott Dewitt, 07-18-2007 03:41:51  
First you will have to determine if it is a 45 or a 46 as there is nothing simular between the two models, parts will not fit from one to the other and setup is completly didderent. 45 older and a bad model, 46 slightly newer and a lot better baler but still with problems.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy