Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Dweitzel-Do yo still need KBA photo's?

Welcome Guest, Log in or Register
Author 
jubilee johnny

06-28-2007 10:14:46




Report to Moderator

I saw your posting today on page two so didn't know if you had seen my message. I restored a KBA last year and could take photos if you still need them.




[Log in to Reply]   [No Email]
dweitzel

07-09-2007 09:40:30




Report to Moderator
 Re: Dweitzel-Do yo still need KBA photo's? in reply to jubilee johnny, 06-28-2007 10:14:46  
Johhny, are you still able to help me with this? I still need a picture of the rear bar tab in the middle. This bar attaches to the rear gangs by chains. I need to fabricate the part that the adjuster pins through to adjust the angle of the rear gang discs.
Dave



[Log in to Reply]  [No Email]
dweitzel

06-29-2007 09:29:56




Report to Moderator
 Re: Dweitzel-Do yo still need KBA photo's? in reply to jubilee johnny, 06-28-2007 10:14:46  
YES!! you can help. I need a close up of the mounting point for the rear bar that an adjuster (turnbuckle) attaches to.

The rear bar has the chains at the end of it attached to the rear discs. I need a picture of the middle of it.

Someone torched the mount point off. I think there is a turnbuckle that mounts on this and when tightened and loosened, it lifts and lowers the outside of the rear discs. Not sure if I"m explaining this correct or not.

I did find most of the parts I needed from the gentleman in PA that was listed on this website dealing with KBA discs. Sounds like a great guy to deal with. I should receive most of my parts in a few days.

Let me know if you can post the pictures here or you can send them to my email.

Thanks!

David

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy