TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

20 ft. 645 vibra shank

Welcome Guest, Log in or Register

Author

Don-Wi

03-29-2007 11:18:06

Report to Moderator

I got a little more info on the cultivator now and I took a better loo at it. I got some pictures too.

It's missing 3 sweeps, but the rest still have visible letters in the middle on the wear side. I didn't see any busted welds, there was evidence that one of the bolts came loose that held a shank to the frame, but a new one was installed. Has a 3 bar Wil-rich harrow on the back, manual fold (doesn't look hard to add a cylinder to each wing) and no cylinder is installed on it. Overall looks to be in good shape, just a little rusty although ours are much rustier than this one.

third party image

Whadda you guys think? They're asking $1300, but I may offer $800 and see where it goes. Otherwise I'll just watch the auctions and try to find something else.

I'm not very brand specific when it comes to tillage, as long as it gets the job done.

Donovan from Wisconsin

[Log in to Reply] [No Email]

dboll

03-30-2007 04:59:06

Report to Moderator

Re: 20 ft. 645 vibra shank in reply to Don-Wi, 03-29-2007 11:18:06

645 shanks are farther apart than a vibra shank digger. I had an 18'years ago and it worked ok, I really like my 24' Wilrich , I wouldn't buy an IH unless it was a 4300 or comparable.

[Log in to Reply] [No Email]

R.J.

03-29-2007 12:08:46

Report to Moderator

Re: 20 ft. 645 vibra shank in reply to Don-Wi, 03-29-2007 11:18:06

Mine is 18ft manual fold had the lift cylinder on it, is in greet shape, has the harrow on back looks just like this one, wanted 850 I offered 700, he took it. Sence seen one for sale for 600, however I didn1t see it so don`t it`s condition.

R.J.

[Log in to Reply] [No Email]

R.J.

03-29-2007 11:58:18

Report to Moderator

Re: 20 ft. 645 vibra shank in reply to Don-Wi, 03-29-2007 11:18:06

R.J.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy