Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

nh sickle knife bolts

Welcome Guest, Log in or Register
Author 
knjj

02-17-2007 09:01:37




Report to Moderator

how tight should sickle knife bolts be on a nh 9foot sickle bar




[Log in to Reply]   [No Email]
IaGary

02-17-2007 09:19:58




Report to Moderator
 Re: nh sickle knife bolts in reply to knjj, 02-17-2007 09:01:37  
As tight as you can without twisting them off.



[Log in to Reply]  [No Email]
knjj

02-19-2007 03:52:29




Report to Moderator
 Re: nh sickle knife bolts in reply to IaGary, 02-17-2007 09:19:58  
is there not a specified torque value in in/lbs.?



[Log in to Reply]  [No Email]
IaGary

02-19-2007 04:35:47




Report to Moderator
 Re: nh sickle knife bolts in reply to knjj, 02-19-2007 03:52:29  
These bolts are not that precise.

If your talking the little 1/4 inch bolts that hold the knifes, or sections as we call them, to the bar.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy