TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

John---plow hub

Welcome Guest, Log in or Register

Author

8N'r--WI

01-09-2007 16:50:03

Report to Moderator

John--is your hub worse than this one (coulter not included)? If my wife hasn't tossed it out, you are welcome to it. I found some NOS replacements parts (hubs,caps and flanges) for my plow last year very reasonable at a NH dealer. He doesn't have any left. I am looking for some spare plow shares that match up to the same moldboard # that you gave in your post. I am almost resolved to just buy an extra plow as they are cheaper than 2 new plow shares alone when you do locate the part. BTW, I am looking for 2 stems that fit on a Ferguson/Dearborn Cultivator.---Tim

[Log in to Reply] [No Email]

Ultradog MN

01-09-2007 17:58:07

Report to Moderator

Re: John---plow hub in reply to 8N'r--WI, 01-09-2007 16:50:03

Tim,
What do you mean by "stems"

[Log in to Reply] [No Email]

8N'r--WI

01-09-2007 20:47:23

Report to Moderator

Re: John---plow hub in reply to Ultradog MN, 01-09-2007 17:58:07

Ultra---in the attached archived picture, it is the "L" shaped piece the spring attaches to. I believe they are 1 1/4" in diameter. There are 11 on the cultivator and I am 3 short on mine---Tim

[Log in to Reply] [No Email]

Colin King

01-10-2007 08:21:22

Report to Moderator

Re: John---plow hub in reply to 8N'r--WI, 01-09-2007 20:47:23

Shoot! You never got those stems? I haven't been doing a lot of shopping lately, but I do keep my eyes open. I'll let you know if something turns up.

Colin, MN

[Log in to Reply] [No Email]

8N'r--WI

01-10-2007 09:15:48

Report to Moderator

Re: John---plow hub in reply to Colin King, 01-10-2007 08:21:22

Colin--nope, I was able to get all but the stems. My supplier thinks they have discontinued the repro's but can get the other parts---the cult. works fine with 8, but would be better with all 11 tines---keep in touch.--Have not heard from you in awhile---let me know how the Real Estate Dealings are going-----sink your toes into the ground up there--you probably dont have much frost (LOL)--Tim

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy