Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

1033 bale wagon

Welcome Guest, Log in or Register
Author 
stu in njo

07-01-2006 20:30:29




Report to Moderator

I went to unload a partial load and bent the rolling rack! I need to find out what angle it is set at. I can't find a service manual that has this info. Thanks Stu




[Log in to Reply]   [No Email]
jim ball

07-02-2006 08:08:17




Report to Moderator
 Re: 1033 bale wagon in reply to stu in njo, 07-01-2006 20:30:29  
i also have a 1033. are you refering to 5 fingers that support bales on third table ? this
is part with the spring that brings back the guide fingers after returning 3 table to home position. i have bent them many times. i attach
a come along to hitch and bring them in line are weld a support piece that brackets in place.
this seems to hold it. however, if i have a small
load i just feed it off by hand to my cows. saves
time fixing

[Log in to Reply]  [No Email]
stu in njo

07-03-2006 06:37:25




Report to Moderator
 Re: 1033 bale wagon THANKS in reply to jim ball, 07-02-2006 08:08:17  
I;ll try that.thats the part I mean.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy