Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

measuring a plow

Welcome Guest, Log in or Register
Author 
KJL

05-24-2006 08:52:28




Report to Moderator

ok... maybe i got it wrong. Don't you measure a plow (12inch, 14inch, 16inch) by the width of the furrow it will cut????




[Log in to Reply]   [No Email]
charley hellickson

05-24-2006 23:40:08




Report to Moderator
 Re: measuring a plow in reply to KJL, 05-24-2006 08:52:28  
i agree, sam is correct. beam to beam is also correct. funny i just learned that way to measure not too many years ago. i learned that from a guy at an auction. i always measure from outside end of share to landside. charley.



[Log in to Reply]  [No Email]
JMS/MN

05-25-2006 07:31:08




Report to Moderator
 Re: measuring a plow in reply to charley hellickson, 05-24-2006 23:40:08  
Only downside to that is that some people put longer shares on a bottom- to make sure they get a complete cut.



[Log in to Reply]  [No Email]
JMS/MN

05-24-2006 13:27:14




Report to Moderator
 Re: measuring a plow in reply to KJL, 05-24-2006 08:52:28  
Yes. Simple thing is to tape the distance from the left edge of one main beam to the left edge of the next one. OK, purists- C-C works, as well as right to right.



[Log in to Reply]  [No Email]
HAS

05-24-2006 14:38:11




Report to Moderator
 Re: measuring a plow in reply to JMS/MN, 05-24-2006 13:27:14  
But what if its only a single plow?



[Log in to Reply]  [No Email]
sam in mo

05-24-2006 16:37:59




Report to Moderator
 Re: measuring a plow in reply to HAS, 05-24-2006 14:38:11  
A single plow is measured from the rear point of the share straight across to the landslide. That is the way I was taught to measure a horse drawn plow.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy