Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Implement Alley Discussion Forum

Small Engine Parts For a Clinton Engine

Welcome Guest, Log in or Register
Author 
Drew445

12-22-2005 06:39:12




Report to Moderator

I am looking for parts for the engine I have got. I have looked for some of the parts but can't seem to find what I need.




[Log in to Reply]   [No Email]
big jt

12-22-2005 23:26:22




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Drew445, 12-22-2005 06:39:12  
What model and what do you need?

I bought the inventory from a small engine shop this spring and there is a limited supply of parts for Clinton. I found the Clinton parts book a couple days ago. So I can cross the numbers. No guarentees that I will have what you need but I am more than happy to look. E-mail me.

jt



[Log in to Reply]  [No Email]
Drew445

12-24-2005 04:04:31




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to big jt, 12-22-2005 23:26:22  
The engine goes to a two-wheel tractor. I think that the tractor model is an Ideal. I will look at the engine sometime and see what I need.

When I tried starting it wouldn"t start. There was a spark from it. I have no idea what else it could be.



[Log in to Reply]  [No Email]
big jt

12-24-2005 07:33:02




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Drew445, 12-24-2005 04:04:31  
Drew

When you look at the engine get the numbers off the engine plate. The books I have will be for the engine and not have any references for applications.

No hurries I won't be able to look up what you need till middle of next week.

jt



[Log in to Reply]  [No Email]
Drew445

01-05-2006 06:21:36




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to big jt, 12-24-2005 07:33:02  
I need a 1/2 inch exhaust pipe and possibly an air cleaner. I am going to check for an air cleaner at my grandfathers.

Do you know about snow plows for them? Down my street someone has a two wheel tractor with a snow plow.

Just Curious!

Drew



[Log in to Reply]  [No Email]
big jt

01-05-2006 07:51:40




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Drew445, 01-05-2006 06:21:36  
Took a quick look. doesn't look like I have any exhaust parts.

I might be able to put together a air cleaner but I need the model of the engine. From what I have looks like Clinton air cleaners came in individual pieces. They had several styles. Thusly I NEED the engine model.

Can't help at all with the snow plow. The shop I bought out didn't keep any of that stuff very long. Try posting down in the Garden Tractor section. Most of these two wheel tractors used different implement mounts so you will need either make & model and or a picture.

jt

[Log in to Reply]  [No Email]
Jim@concordfarms.

12-22-2005 13:45:58




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Drew445, 12-22-2005 06:39:12  
Try www.smallenginebusiness.com. They list quite a few maintenance and repair parts for Clinton engines. Jim.



[Log in to Reply]  [No Email]
Drew445

12-24-2005 04:06:35




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Jim@concordfarms., 12-22-2005 13:45:58  
I think I tried that site. I found one but I can't remember what it was. I will try this website. Thanks.



[Log in to Reply]  [No Email]
Drew445

12-24-2005 04:17:14




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Drew445, 12-24-2005 04:06:35  
Yeah, this is the website I found. Thanks



[Log in to Reply]  [No Email]
Drew445

12-24-2005 04:10:55




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Drew445, 12-24-2005 04:06:35  
Yeah, this is the website I found. Thanks



[Log in to Reply]  [No Email]
old

12-22-2005 07:49:52




Report to Moderator
 Re: Small Engine Parts For a Clinton Engine in reply to Drew445, 12-22-2005 06:39:12  
Most be a real old engine. I haven't seen a clinton in years other then maybe the ones I have in my junk pile that is.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy