Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum

Montgomery Ward Tiller model# - GiL 1580J

Welcome Guest, Log in or Register
Author 
jimfather

09-17-2007 09:17:02




Report to Moderator

Would anyone possibly have a parts list/owners manual for a front tine tiller Montgomery Ward GiL 1580J. I need belt sizes and routing configuration and a full picture or instruction. I think all the pulleys are there but you never know. This is my grandfathers tiller and I need to bring it back up to par. Any help would be greatly appreciated.

Thank You in advance,

Jim

jimfather@yahoo.com

[Log in to Reply]   [No Email]
NYCD

09-20-2007 01:00:58




Report to Moderator
 Re: Montgomery Ward Tiller model# - GiL 1580J in reply to jimfather, 09-17-2007 09:17:02  
Sorry Jim, I sent the wrong URLs..... Here are the Tillers..... My mind was on snowblowers.third party image

Link

Link

Link

You'll have to Copy and Paste these in to your address bar.

[Log in to Reply]  [No Email]
jimfather

09-20-2007 08:21:46




Report to Moderator
 Re: Montgomery Ward Tiller model# - GiL 1580J in reply to NYCD, 09-20-2007 01:00:58  
Thank You NYCD. These links have been helpful, but still looking for specifics listed in the original post. Every little bit helps.



[Log in to Reply]  [No Email]
NYCD

09-20-2007 00:38:33




Report to Moderator
 Re: Montgomery Ward Tiller model# - GiL 1580J in reply to jimfather, 09-17-2007 09:17:02  
Hi Jim,

Take a gander at this site.... Its all about Gilson Snowblowers.

Good Luck!

Link

http://home.gwi.net/~spectrum/snowparts.html



[Log in to Reply]  [No Email]
JoeK(WI)

09-17-2007 10:04:47




Report to Moderator
 Re: Montgomery Ward Tiller model# - GiL 1580J in reply to jimfather, 09-17-2007 09:17:02  
Built by Gilson..now part of Toro.."some" archived manuals(photocopyed)available from Toro for under $10(5-7) and POLITE request as someone has to physically find/ dig out old master and copy,prepare and mail it.
"Forward" belt should be a Gates 6835(1/2x35)
"Reverse "belt should be a Gates 6737(3/8x37)



[Log in to Reply]  [No Email]
jimfather

09-20-2007 10:25:35




Report to Moderator
 Re: Montgomery Ward Tiller model# - GiL 1580J in reply to JoeK(WI), 09-17-2007 10:04:47  
Called Toro Company today(9-20-2007) and they located owners manual. Part #"s 235668 and 229250. Total cost for both $8.19 including postage. They also stated that many parts for Gilson tillers are still available through them.

Jim



[Log in to Reply]  [No Email]
jimfather

09-18-2007 07:28:08




Report to Moderator
 Re: Montgomery Ward Tiller model# - GiL 1580J in reply to JoeK(WI), 09-17-2007 10:04:47  
Thank You. I have purchased the belts last week and for some reason they do not fit properly. I had one person tell me it may take a 10 to 18 inch flat belt or something like that. But it doesn"t seem correct.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy