Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Garden Tractors Discussion Forum

Magnum 18 cam woes

Welcome Guest, Log in or Register
Author 
Barry Pheiffer

02-06-2006 17:35:46




Report to Moderator

I just aquired a Cub Cadet 1541 with a Magnum 18. I bought it knowing it didn't run. After running a comp. test and finding no compression, I pulled a head off and found that the valves were not moving. I removed the oil fill neck and can see that the cam gear is not turning but the crank is. Is the crank gear pinned or keyed? Or do I have a new boat anchor??? Is there a parts breakdown available on the net?? Thanks.

[Log in to Reply]   [No Email]
R Bedell

02-07-2006 03:08:48




Report to Moderator
 Re: Magnum 18 cam woes in reply to Barry Pheiffer, 02-06-2006 17:35:46  
Go to this link & download this manual....



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy