Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Harry Ferguson Tractors Discussion Forum
:

F40

Welcome Guest, Log in or Register
Author 
ferg0ne

01-24-2008 17:31:32




Report to Moderator

Found a Ferguson F40 asking price $2300.00 runs tires need replaced but hold air been used on bush hog may use some oil???? needs paint Good price or ?




[Log in to Reply]   [No Email]
Jeff-oh

01-25-2008 06:31:12




Report to Moderator
 Re: F40 in reply to ferg0ne, 01-24-2008 17:31:32  
I saw one in the Indiana area with power steering and 2 stage clutch for that price range. Thoes are two very nice features.

At this point I would not even consider buying a TO-35 or F-40 if it didn't have a two stage clutch.

Jeff



[Log in to Reply]  [No Email]
MF Poor

01-25-2008 02:54:07




Report to Moderator
 Re: F40 in reply to ferg0ne, 01-24-2008 17:31:32  
"going rate" for a running F-40 in average to poor condition around here is $2000 to $2500.

Good engine, average condition, $3000

Over-all good condition but in need of TLC, seen 'em go for $4000+ here of late.

So. Your price isn't a bargain, but it isn't a rip off either, based on your description.



[Log in to Reply]  [No Email]
phil(va)

01-24-2008 17:39:26




Report to Moderator
 Re: F40 in reply to ferg0ne, 01-24-2008 17:31:32  
Tires are at least $600 if you need all four. "Uses some oil" has me worried about the price. Are you saying it may need rings or full overhaul? If you farm that job out to a pro, you are looking at at least $1500. How is the clutch? If it is questionable, and you have the tractor split for an overhaul, you might consider a new clutch, but the two stage clutch on the F40 is quite expensive. You can quickly have $5k in it and still not painted. It all hinges on the engine situation.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy