Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Attention Forum Users: On the 28th of December 2023 at 9:00am Central Time, we will be taking the forums down for maintenance while we prepare the new forums for your use. Please click here for more information.

Harry Ferguson Tractors Discussion Forum
:

TO-35 Wiring

Welcome Guest, Log in or Register
Author 
greenbank

08-15-2007 00:22:29




Report to Moderator

If any of you folks have a TO-35 with the original wiring on it for lights, can you send me or upload to this thread a photo showing how it's routed from the final clip on the hydraulic cover to the light itself on the rear fender, and how it's routed along the sump? Aside from making my own, anyone have sources for the various clips?




[Log in to Reply]   [No Email]
Phil Fenner

08-15-2007 09:18:58




Report to Moderator
 Re: TO-35 Wiring in reply to greenbank, 08-15-2007 00:22:29  
Lights and associated wiring and routing are covered in great detail in the FENA newsletter #9.
Write to Paul Nelson at PO box 3029, Chino Valley, AZ 86323. Cost is $3.50 and make checks or money orders out to Paul.

There is too much detail to cover in this forum and the newsletter will provide you with all the details necessary to do the job correctly.

Phil(WA)



[Log in to Reply]  [No Email]
Bob (Aust)

08-15-2007 00:37:00




Report to Moderator
 Re: TO-35 Wiring in reply to greenbank, 08-15-2007 00:22:29  
I'm not sure how it should be, but on my TEA20 I used a length of steel fuel line (maybe 3/8 inch?) from the engine, back along the transmission and diff housing and welded on lugs to align with the transmission topcover bolts etc. Both ends are turned down to avoid water entry. Looks very neat and protects the wires.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy